The Powerline 500 Triple Pack which includes 3 Powerline 500 adapters creates in an extremely simple way a high-speed home network using your home’s existing electrical wiring at speeds up to 500 Mbit/s.
No new wire required! Connect computers, consumer electronic and network-compatible devices to the Internet in any room and any floor of your home by simply using a power outlet.
You just have to connect one Powerline 500 adapter to your internet modem via an Ethernet port and your Internet connection becomes immediately available from any power socket by using the second and third Powerline 500 adapters in the rooms of your choice.
No power outlet goes to waste because each Powerline 500 adapter is equipped with an extra noise filtered power socket.
Operating Temperature: 0 °C ~ +40 °C Storage Temperature: -40 °C ~ +70 °C Operating Humidity: 10%~90% non-condensing Storage Humidity: 5%~90% non-condensing
In consequence of continuous research and development technical specifications, design, picture and appearance of products may change without notice. STRONG shall not be responsible in any manner relating to the logos, brands and/or trademarks displayed herein which are not registered by STRONG. All product names are trademarks or registered trademarks of their respective owners. Wi-Fi is a registered trademark of Wi-Fi Alliance®.
Data throughput, distance, signal range, and coverage area per m² are used only for reference and based on performance test results under normal use case conditions. Actual performances are not guaranteed and may vary due to differences in operating environments, distance and positioning of the products, mix of products used, building materials, wireless and electrical interferences and other adverse conditions.
The Powerline 500 Kit, which includes 2 Powerline 500 adapters,
creates in an extremely simple way a high-speed home network using your
home’s existing electrical wiring at speeds up to 500 Mbit/s.
No new wire is required!
Connect computers, consumer electronics and network compatible devices to the
Internet in any room and any floor of your home by simply using a power
just connect one Powerline 500 adapter to your internet modem via an Ethernet
port. Your Internet connection becomes immediately available from any power
socket by using the second Powerline 500 adapter in the room of your
Use the Powerline 500 Kit to connect all your bandwidth hungry
wired devices to the Internet, such as IPTV decoder, Smart TV, Amazon Fire
TV, Android box, Apple
TV®, media player,
computer, games console ... and free up your Wi-Fi network.
Each Powerline 500 Kit adapter is equipped with 1 Ethernet port. Connect
all of your network compatible devices to the Internet in minutes! No system
requirements! No software to install! Plug & Play.
The Powerline 500 Kit is the best solution to
stream your HD videos and movies on your fixed device players all over the
house without running any cable.
your modem to your IPTV decoder with high video quality without running
Your modem and your IPTV decoder are not in the same room? It
is not an issue. No need to run cables! The Powerline 500 Kit is your solution.
Connect one Powerline 500 adapter to your modem through the Ethernet port.
Then locate your IPTV decoder and your TV in the room of your choice. You
only need to connect the second Powerline 500 Adapter to your IPTV decoder to
enjoy your live TV.
have already successfully installed a Powerline 500 Kit? Congratulations! You
now want to extend your network to other parts of your home to connect even
more network devices?
Simply add a new Powerline 500 adapter to the room of your choice. Connect
your new Powerline 500 adapter to the existing network in seconds with the
"Connect & Secure" button.
No system requirements! No software to install! Just Plug & Play.
Powerline 500 adapter is equipped with an extra noise filtered power
Do not waste any power outlet. Plug the Powerline 500 adapters directly
into the wall outlet and use the extra noise filtered power socket to power
your appliances or to plug in a power strip.
The integrated noise filter reduces electrical interference and improves
the performance of the Powerline communications.
must be re-paired.
Each new powerline socket must be paired with the first socket.
Connect the adapters one after the other to a power strip (example picture).
Make sure that each adapter is connected with an Ethernet RJ45 cable (supplied in the box) to a working device (box, Android box, Smart TV, computer, etc.)
be communication on the Ethernet port otherwise the adapter will automatically
go into standby mode.
INTERNET BOX / RJ45 cable / Powerline 500 / Multi plug / Powerline 500 / RJ45
cable / PC
Once the adapter is plugged in and connected to the Ethernet, simply press the "Connect & Secure" button on the front panel for 10 seconds.
Repeat the same operation on the second adapter, always taking care to have an active Ethernet connection.
Repeat the same operation for a third powerline and this up to 8 powerline 500 Strong on the same electrical installation.
LEDs must be green at the end of the operations.
rate displayed on the STRONG Powerline 500 (as well as all Powerlines 500 on
the market) is the maximum data rate used for the transmission of signals on
the link. The useful speed is lower than
the maximum speed because the transmission of data always requires a
significant use of the band, which reduces the available bandwidth. In fact a
Powerline 500 has a useful data rate of around 100Mbit/s.
of your electrical installation can further reduce the available bandwidth and
you will usually get less than 100Mbit/s.
extensive or old electrical installation can significantly increase the data
rate loss. Potentially disruptive
electrical devices left plugged in unnecessarily can also significantly
increase throughput losses. (e.g. telephone charger, power transformer, etc.).
information, to transmit an HD signal, 5Mbit/s is sufficient, to transmit a UHD
(4K) signal, 20Mbit/s is sufficient.
normal, the Powerlines 500 automatically go to sleep if no activity is
detected. When a signal is detected on the Ethernet port, the PLC500 will turn
It may take
a few seconds for a Powerline 500 in standby mode to detect new activity and
turn back on.
500 is sufficient but it will not allow you to benefit from all the potential
speed offered by your internet service provider. If you want a Powerline
network that matches your fibre optic speed, you must ensure that your
electrical installation complies with standards and use Powerlines equipped
with Gigabit ports. The 1000, 1200, 1300 or 2000 Powerlines are equipped with
impossible to connect Powerlines with different data rates. A Powerline 500
cannot be connected to a Powerline 1000 or more. In theory, a Powerline 500 can be connected
to Powerlines 500 of different brands, but we cannot guarantee that it will
work properly with Powerlines 500 of other brands, as there may be software